TOP >> UTAH STATE UNIVERSITY >> Civil engineering
 
Browse Institutions
You are viewing titles for UTAH STATE UNIVERSITY in the Civil engineering available through the UMI Dissertations & Thesis Gradwoorks site
 
Water management and user association analysis for irrigation improvement in Egypt
Inlet control hydraulics of multiple circular culverts
 
Structural health monitoring: Long-term, real-time ambient vibration monitoring system
Near-source effects on base isolation buildings
 
A tool to analyze environmental impacts of roads on forest watersheds
Vapor cavity collapse downstream from orifice plates
 
Application of self-learning machines in predicting Great Salt Lake water level
Transitional flow between orifice and non-orifice regimes at a rectangular canal gate
 
A laboratory study of streambed stability in bottomless culverts
The influence of debris cages on critical submergence of vertical intakes in reservoirs
 
Air demand in free flowing gated conduits
Analysis effectiveness of bridges with partial isolation
 
Effectiveness and feasibility of inter-story isolation systems
Forecasting the water demand using regression and cluster analysis for Salt Lake City
 
Impacts on water quality of rural coastal aquifers due to population growth and land use exploitation: A case study from Kalpitiya Peninsula, Sri Lanka
Application of structural control for civil engineering structures
 
Generalized event tree algorithm and software for dam safety risk analysis
Vulnerability of shallow aquifers of the conterminous United States to nitrate: Assessment of methodologies
 
Development of a mathematical model for 3D reconstruction of target objects by photogrammetry
Energy losses in cross junctions
 
Laboratory testing of precast bridge deck panel transverse connections for use in accelerated bridge construction
Metering secondary water in residential irrigation systems
 
Parshall flume staff gauge location and entrance wingwall discharge calibration corrections
Development of mechanically stabilized earth (MSE) wall inspection plan and procedure for failure mode analysis and risk assessment
 
Factors affecting air entrainment of hydraulic jumps within closed conduits
Internal design of Mechanically Stabilized Earth (MSE) retaining walls using crimped bars
 
Pullout and tensile behavior of crimped steel reinforcement for Mechanically Stabilized Earth (MSE) walls
Ultimate shear capacity and residual prestress force of full-scale, forty-one-year-old prestressed-concrete girders
 
Increased functionality of floodplain mapping automation: Utah Inundation Mapping System (UTIMS)
Effects of submergence in Montana flumes
 
The Utah Pilot Bridge, live load and dynamic testing, modeling and monitoring for the long-term bridge performance program
Estimating and verifying household potential to conserve water
 
Transportation network resiliency: A fuzzy systems approach
Dynamic testing, finite element modeling, and long-term instrumentation of a box girder post-tensioned bridge for the Long-Term Bridge Performance program
 
Destructive testing and finite-element modeling of full-scale bridge sections containing precast deck panels
Live load test and finite element model analysis of a box girder bridge for the long term bridge performance program
 
Destructive testing of composite precast concrete deck panels and built-up steel plate girders
Assessing the potential for seepage barrier defects to propagate into seepage erosion mechanisms
 
Discharge coefficient performance of venturi, standard concenteric orfice plate, V-cone, and wedge flow meters at small Reynolds numbers
Safety evaluation of work zone practices in Utah
 
Piano Key Weir Head Discharge Relationships
Evaluation and improvements on row-column order bias and grid orientation bias of the progressive morphological filter of lidar data
 
Estimation of field alfalfa evapotranspiration in a windy, arid environment
Live-load testing and finite-element analysis of a steel cantilever deck arched Pratt truss bridge for the Long-Term Bridge Performance program
 
Performance of transverse post-tensioned joints subjected to negative bending and shear stresses on full scale, full depth, precast concrete bridge deck systems
Dynamic testing of a steel truss bridge for the Long Term Bridge Performance program
 
Canal wave oscillation phenomena due to column vortex shedding
Evaluation and seismically isolated substructure redesign of a typical multi-span pre-stressed concrete girder highway bridge
 
Ultrasonic flow measurement for pipe installations with non-ideal conditions
Movement of air through submerged air vents
 
Air demand for low-level outlet works
Fish passage through rehabilitated culverts laboratory study
 
Relationship between mass and modal frequency of a concrete girder bridge
Finite element modeling of full depth precast concrete bridge deck connections in bending and shear
 
Temperature effects on integral abutment bridges for the long-term bridge performance program
Dynamic testing and finite element modeling of a steel girder bridge for the long-term bridge performance program
 
Performance of post-tensioned curved-strand connections in transverse joints of precast bridge decks
Finite element modeling of transverse post-tensioned joints in Accelerated bridge construction (ABC) full-scale precast bridge deck panels
 
Heterogeneous water and energy end-uses and implications for residential water and energy conservation and management
Effects of single panel replacement on a full scale, full depth, precast concrete bridge system
 
A parametric study of embankments on clay soils during earthquake shaking
Flow characteristics of arced labyrinth weirs
 
Laboratory modeling of critical hydraulic conditions for the initiation of piping
Developing a framework to analyze the effect of mobile technology within a department of transportation
 
An analysis of traffic sign performance for the establishment of a maintenance plan
Traffic operations analysis of merging strategies for vehicles in an automated electric transportation system
 
Transportation network resiliency: A study of self-annealing
A Bayesian method for groundwater quality monitoring network analysis
 
Water resources management considering demand, supply, land use changes, and economic aspects: A case study from Salt Lake County, Utah
Assessing transportation network vulnerability using a combined travel demand model
 
Calculated surface velocity coefficients for prismatic open channels by three-dimensional hydraulic modeling
A collection of new studies using existing and proposed techniques and instrumentation for nondestructive testing and analysis of concrete materials and structures
 
Bridge instrumentation and the development of non-destructive and destructive techniques used to estimate residual tendon stress in prestressed girders
Models and algorithms for addressing travel time variability: Applications from optimal path finding and traffic equilibrium problems
 
Modeling soil behavior in large strain resonant column and torsional shear tests
Canal structure automation rules using a hydraulic simulation model, an accuracy-based learning classifier system, and genetic algorithms
 
Two location problems in transportation
The effect of climate change on the hydrology of a mountainous catchment in the western United States: A case study at Reynolds Creek, Idaho
 
Sediment transport impacts upon culvert hydraulics
Age effects on iron-based pipes in water distribution systems
 
Characterizing ecologically relevant variations in streamflow regimes
Fundamentals of operation of the induced bed reactor (IBR) anaerobic digester
 
Water allocation challenges in rural river basins: A case study from the Walawe River Basin, Sri Lanka
Labyrinth weirs
 
Bayesian data-driven models for irrigation water management
Structural identification and damage identification using output-only vibration measurements
 
Relationships between runoff, land cover and climate in the semi-arid intermountain region of the western U.S.A
Improving complementary methods to predict evapotranspiration for data deficit conditions and global applications under climate change
 
Unified rating equations for cutthroat flumes derived from a three-dimensional hydraulic model