|
CFD modeling of cavitation in an axial piston pump
|
An experimental and simulation study of fuel consumption and NOx emissions from biofueled diesel engines
|
| |
|
Dual pump CARS measurements in counter-flow flames using an injection-seeded optical parametric pump source
|
Power losses in the lubricating gap between cylinder block and valve plate of swash plate type axial piston machines
|
| |
|
Biosensing with nanocube-augmented carbon nanotube networks
|
Multifunctional additives for composite solid propellant
|
| |
|
Implementation of crack arrest properties for reliability enhancement on MEMS cantilever
|
Refractive index measurements using a dual-mode phase Doppler anemometer
|
| |
|
Experimental and analytical investigations of fluid condensation in a vertical tube
|
Particulate matter load estimation in diesel particulate filters
|
| |
|
Hydrodynamic damping of microcantilevers near solid walls
|
Micromachining of titanium vascular stents
|
| |
|
Modeling and simulation of V-Gutter stabilized turbulent flames
|
Thermal property measurements of high pressure metal hydrides
|
| |
|
Ion transport through capillary atmospheric pressure interfaces of mass spectrometers
|
Investigation of reducing energy dissipation in axial piston machines of swashplate type using axially waved pistons
|
| |
|
Continuum characterization of flexible foams for medical applications and computational evaluation of pressure profile
|
Comparison study of position control with 2-way and 3-way high speed on/off electrohydraulic valves
|
| |
|
Coupled multi-domain modeling and simulation of high speed on/off valves
|
Reinforcement Learning memory adaptation using neural networks
|
| |
|
Characterization of nanoscale aluminum and ice solid propellants
|
Experimental study of relative velocity and drag force in large diameter pipes
|
| |
|
Preliminary studies using wikis for communication in early engineering design
|
Wear of nanostructured tool coatings bonded to turning inserts dry turning a tantalum tungsten alloy
|
| |
|
Explosive blast loading experiments for TBI scenarios: Characterization and mitigation
|
Determination of the transport properties of brain tumors using contrast-enhanced Magnetic Resonance Imaging
|
| |
|
Development of a dynamic model for subsurface damage in sandwich composites
|
Optimization of soy-biodiesel combustion in a modern diesel engine
|
| |
|
Computational analysis of high-speed axial fan cascade flows
|
Numerical modeling and simulation of turbulence-cavitation interactions in a venturi geometry
|
| |
|
Confined flow cavitation in hydraulic oil: Test rig design, pressure measurement, and PIV
|
Experimental investigation into the effects of blade number on wind turbine rotor aeroacoustics and performance
|
| |
|
Systematic molecular dynamics study of load, speed, and temperature effects on atomic stick-slip friction
|
Measurement and analysis in a subscale rocket combustor
|
| |
|
Measurement and prediction of flow boiling of water in silicon microchannels
|
Measurement and modeling of micro-perforated panels
|
| |
|
Design and analysis of a discrete angular joint for use in digital robotic systems
|
Manipulation approaches for hyper-redundant modular robots
|
| |
|
Modeling and simulation of an optimized wireless network in a Naval ship system of systems
|
CFD modeling of plasma thermal reactor for waste treatment
|
| |
|
Titanium-based multi-channel, micro-electrode arrays for brain machine interface devices
|
MEMS bandpass filters based on cyclic coupling architectures
|
| |
|
Sensory feedback mechanism for virtual build methodology
|
A study of the effects of panel stiffness on transmission of low-frequency sound
|
| |
|
A study of the piston ring - cylinder bore interface for bent axis axial piston pump using an advanced computer model
|
Evolution of threading dislocations in passivated thin film.
|
| |
|
Investigating the relationship between fracture surface mismatch and the plastic J - Integral in bovine cortical bone: Application of stereophotogrammetry and shape from focus
|
Numerical modeling and analysis of the damage characteristics of a honeycomb core within a sandwich panel
|
| |
|
A cohesive zone model approach to multiaxial fatigue
|
Strength predictions of bonded joints using the critical CTOA criterion
|
| |
|
Effect of intake valve closure timing on effective compression ratio and gas exchange process of a modern diesel engine
|
Design and analysis of noise suppression exhaust nozzle systems
|
| |
|
An acceleration technique for the solution of the phonon Boltzmann transport equation
|
The combustion performance of nanosilicon based energetic materials
|
| |
|
Influence of electronic fuel injection parameters on combustion-induced noise in a small diesel engine
|
Simulation and experiments of low pressure water vapor flows applied to freeze-drying
|
| |
|
Assessment of turbulence models and corrections with application to the Orion Launch Abort System
|
Numerical simulations of Knudsen forces in microsystems
|
| |
|
Nondestructive evaluation of composite material damage using vibration reciprocity measurements
|
Molecular dynamics simulations of the mechanical deformation behavior of face-centered cubic metallic nanowires
|
| |
|
Center of gravity effects using forced vibration response operational data
|
Measurement of foam properties and modeling of layered foam systems
|
| |
|
A quantitative technique for species concentration determination for lifetimes exceeding the laser free temporal range
|
Computational fluid dynamics simulation of blast furnace hearth drainage
|
| |
|
Large eddy simulations of 2-D and 3-D spatially developing mixing layers
|
Feasibility study and demonstration of an aluminum and ice solid propellant
|
| |
|
Ordered carbon nanotube growth and optical reflectance in porous anodic alumina templates
|
Comprehensive modeling of electrostatically actuated MEMS beams including uncertainty quantification
|
| |
|
The viability and performance characterization of nano scale energetic materials on a semiconductor bridge (SCB)
|
Experimental investigation of fretting wear
|
| |
|
Strain telemetry for load identification and center of gravity measurement
|
Characterization of rheological and ignition properties of hypergolic propellants
|
| |
|
Controller design and measurement for active vibration damping of skid-steer loader via displacement controlled actuators
|
A simple method for determining stress intensity factors for a crack in bi-material interface
|
| |
|
Effect of molecular structure on tribological properties of free fatty acids and correlation to human detection thresholds
|
Design and aero-acoustic analysis of a counter-rotating wind turbine
|
| |
|
The development, modeling, and testing of a hydraulic topography with integrated energy recovery (TIER)
|
The design and performance of a centrifugal compressor research facility
|
| |
|
Locally and globally shape aware volumetric understanding
|
Real time UAV autonomy through offline calculations
|
| |
|
Measurement of thermionic electron emission from modified graphene petals
|
Femtosecond laser direct writing of silicon nanowires
|
| |
|
Modeling, estimation, and control of a piezoelectric actuated fuel injector
|
Construction of a web based tutorial for 3D visualization of ternary phase diagrams
|
| |
|
Topological design optimization of nested channels for squeeze flow of thermal interface materials
|
Dynamic gearbox simulation for fault diagnostics using a torque transducer
|
| |
|
Optimal control: An effective method for designing hydraulic hybrid vehicles
|
Bounding drift in pedestrian navigation with inertial measurement unit and human gait model
|
| |
|
An experimental study of ammonia borane based hydrogen storage systems
|
Study of the feasibility of estimating combustion noise radiation in reverberant environments
|
| |
|
Applications of eigenmode coupling to damage detection in beams
|
Study of catalyst layer for polymer electrolyte fuel cell
|
| |
|
Performance of a planar robotic manipulator with discrete trinary revolute joints
|
Nonlinear constrained component optimization of a plug-in hybrid electric vehicle
|
| |
|
An experimental investigation of a hydrogen oxygen flame steam generator
|
Steady/unsteady gas turbine combustion simulator
|
| |
|
Development and verification of data analysis strategies for characterizing military helmet-head performance
|
Instrumented infinitely variable transmission
|
| |
|
Computational design of swash plate type axial piston pumps a framework for computational design
|
Photographic study and modeling of critical heat flux in horizontal flow and vertical upflow boiling with inlet vapor void
|
| |
|
Displacement controlled excavator with CAN bus control
|
Power plant waste heat rejection and utilization options
|
| |
|
The use of microperforated materials as duct liners
|
Automating the fret slotting process using a PLC controlled 1.5 axis CNC mill
|
| |
|
Stereoscopic vision's impact on spatial ability testing
|
On the renovation of the three-stage axial compressor research facility for compressor performance research
|
| |
|
Precision motion control of electro-hydraulic systems with energy recovery
|
A multi-step reaction model for stratified charge combustion in wave rotors
|
| |
|
Fault detection using spectral methods: Wavelets and correlation techniques
|
Pressurized water model of the blast furnace hearth drainage
|
| |
|
Computational Fluid Dynamics simulation and Virtual Reality visualization of a blast furnace hearth
|
Construction of a web-based tutorial for three-dimensional hypothetical ternary phase diagrams
|
| |
|
An improved diagnostic mass consistent model for wind field construction
|
Applications of numerical modeling and virtual reality visualization to industrial processes
|
| |
|
Construction of a web-based tutorial for hypothetical binary phase diagrams
|
CFD simulation and VR Visualization for industrial applications
|
| |
|
Autonomous navigation via measurement of natural optical signals
|
Influence of the cavity mode on tire surface vibration
|
| |
|
Quantifying multiple types of damping acting on bronze-wound guitar strings
|
Characterizing the structural dynamic response of a horizontal axis wind turbine in a yawed flow field using rotor- and nacelle-mounted inertial sensors
|
| |
|
Comparative analysis of a low-speed wind tunnel designed for renewable energy applications
|
Identification and counting procedure for tin whiskers, hillocks, and other surface defects
|
| |
|
Injector waveform monitoring of a diesel engine in real-time on a hardware in the loop bench
|
Coupled dynamic analysis of flow in the inlet section of a wave rotor constant volume combustor
|
| |
|
Variable volume mixer for general purpose lab-on-chip applications
|
The improvement of the LQR controller by using the SQP method
|
| |
|
Design tool for under-floor air distribution system
|
Detection of blade damage and ice accretion for health monitoring of wind turbines using integrated blade sensors
|
| |
|
Analysis of wind turbine pitch control bearings---discrete element method and finite element analysis
|
Detonation failure characterization of non-ideal explosives
|
| |
|
Measurement of thermal conductivity and contact resistance using the photoacoustic and thermoreflectance methods
|
Effect of diluent on gelled monomethylhydrazine ignition and dual flame behavior
|
| |
|
Sound field reconstruction and its application in loudspeaker sound radiation prediction
|
Integration of economic and environmental considerations into process planning
|
| |
|
Study on Hertzian cone crack in brittle materials and experimental investigation of fretting wear in bearings using bearing fretting test rig
|
Combustion characteristics of nanoenergetic materials composed of aluminum, nickel oxide and a fluoroelastomer
|
| |
|
Experimental investigation of vane clocking effects on stall performance and unsteady vane boundary layer development in a multistage compressor
|
Linear and nonlinear dynamics of silicon nanoresonators
|
| |
|
On the stability of legged locomotion
|
Energy and CFD modeling of roof integrated photo-voltaic thermal systems
|
| |
|
Design of a multi-stage research compressor for cantilevered stator hub clearance flow investigations
|
Accelerometer based inertial measurement units
|
| |
|
Environmental characterization of VARTM repair technology
|
Modeling oxygen and hydrogen combustion under supercritical conditions using computational fluid dynamics
|
| |
|
Organic rankine cycle with solution circuit for low-grade heat recovery
|
Establishing a baseline damage index for reliable damage detection: Full scale validation
|
| |
|
Effects of radial forcing on spring-mass running
|
Design of a centrifugal compressor research facility for low specific speed applications
|
| |
|
Developments in processing and ballistics of dicyclopentadiene-based composite solid propellants
|
A computational examination of utility scale wind turbine wakes to provide improved siting and efficiency
|
| |
|
Embedding freehand sketching into a project-based design course
|
Atomic force microscopy analysis of complex materials
|
| |
|
Connecting cell structure to local mechanical properties by combining multi-harmonic AFM methods with fluorescence microscopy
|
Optimal control based design of output coupled power split hydraulic hybrid
|
| |
|
Applications of numerical simulation for blast furnace
|
Low voltage electrohydrodynamic conduction micropumps
|
| |
|
3-D wind fields construction for suburban environment
|
Correlation of cooling efficiency and media porosity & transport phenomena of direct evaporative cooler
|
| |
|
3D visualization of ternary phase diagrams liquidus surfaces using virtual reality
|
Computational investigations of ignition delay and flame lift-off in diesel jets
|
| |
|
The impact of surface effects on hydraulic motor startup friction and the coefficient of static friction
|
A pilot study of the benefits of retrocommissioning on health care facility energy performance
|
| |
|
The role of biot number in turbine-cooling design and analysis
|
Laser direct deposition of shape memory alloy- nitinol and its characterization
|
| |
|
Low-temperature oxidation of methanol with the assistance of platinum nanoparticles
|
Uncertainty quantification in capacitive RF MEMS switches
|
| |
|
Effects of turbulence modeling in predicting flow and heat transfer in a duct with pin fins
|
Kinematic estimation method of ground vehicle center of gravity based on dynamic measurements
|
| |
|
Single-phase and two-phase heat transfer during confined impingement of single jets and jet arrays
|
Multi-scale simulation of nanoindentation
|
| |
|
Experimental and numerical analysis of water blast mitigation: Focusing on solid water barriers, water sprays,and water-sheets
|
Numerical analysis of flow field for small scale helical twisted vertical axis wind turbine (vawt)
|
| |
|
Computational fluid dynamics simulation of blast furnace shaft
|
Single-laser-shot femtosecond coherent anti-Stokes Raman scattering temperature measurements at 5 kHz in a jet diffusion flame
|
| |
|
Application of uncertainty quantification techniques for a nonlinear 1:2 internal resonance system
|
Contribution to digital prototyping of axial piston pumps/motors
|
| |
|
FPGA model based within-a-cycle estimation of rate shaping for a piezoelectric fuel injector
|
Vapor compression cycle enhancements for cold climate heat pumps
|
| |
|
Bio-inspired flapper with electromagnetic actuation
|
An empirical method for tuning a discrete PID controller to achieve near time-optimal response of a first order plus integrator plant
|
| |
|
Within-a-cycle flow rate estimation for piezoelectric fuel injection
|
Data analysis of diesel engine faults
|
| |
|
Enhancement of shape and surface layer properties by laser direct deposition
|
Comprehensive methodology for finned air-cooled condensers and spray cooling
|
| |
|
Whole-body human-to-humanoid motion transfer with balance manipulability ellipsoid
|
Intelligent multivariable control system
|
| |
|
Diode-laser-based sensors for flame diagnostics and combustion-emissions monitoring
|
Psychophysics study and reduction of banding artifact in secondary colors using an embedded implementation of closed-loop control on multiple motion systems in an electrophotographic process
|
| |
|
A methodology for mechanical diagnostics and prognostics to assess durability of ground vehicle suspension systems
|
Heat transport in silicon microchannel arrays
|
| |
|
Hydroxyl spatio-temporal statistics for turbulent partially premixed opposed-jet flames
|
Numerical simulation and experiments of fatigue crack growth in multi-layer structures of MEMS and microelectronic devices
|
| |
|
Modeling macrosegregation during the vacuum arc remelting of Ti-10V-2Fe-3Al alloy
|
Analytical theory for the motion of spinning rigid bodies
|
| |
|
Coupling of multizone and CFD programs for building airflow and contaminant transport simulations
|
Large eddy simulations of turbulence-chemistry-radiation interactions in diffusion flames
|
| |
|
Detection and mitigation of contaminant transport in commercial aircraft cabins
|
Validation of vibro-acoustic numerical models
|
| |
|
Piston ring lubrication and friction reduction through surface modification
|
Dynamics of oscillating microcantilevers in viscous fluids
|
| |
|
Aging of zeolite based automotive hydrocarbon traps with applications to diagnostics
|
Modeling and analysis of a novel rotary compressor
|
| |
|
Wear of nanostructured coated cutting tools during mixed scale machining
|
Electrical and thermal transport in nanotube based thin film transistors
|
| |
|
Vane clocking effects in an embedded compressor stage
|
Numerical and experimental investigations of practical issues in the use of wave propagation for damage identification
|
| |
|
Hierarchical partition of unity constructions for multiscale design optimization of heterogeneous objects
|
Modeling stress and stressmigration in microelectronics interconnects
|
| |
|
Tactual transmission of phonetic features
|
On the use of vortex generators to control cavitation in a backward facing step flow
|
| |
|
Sub-micron thermal transport in ultra-scaled metal oxide semiconductor (MOS) devices
|
Thermal and fluidic characterization of piezoelectric fans
|
| |
|
Large eddy simulation and noise prediction of turbulent heated and swirling jets
|
Nonlinear dynamics and force spectroscopy in dynamic atomic force microscopy
|
| |
|
Molecular simulations for determination of transport properties of nano-composites
|
Investigation of the resonant response of mistuned rotors
|
| |
|
Development of a two-point high-speed laser-induced fluorescence technique and its applications to turbulent jet flames for OH concentration
|
Modeling of airflow and contaminant transport in enclosed environments
|
| |
|
Strategies for data-based diesel engine fault diagnostics
|
A study of radiation and flow properties of buoyant turbulent diffusion flames
|
| |
|
Simulations of near-percolation thermal transport in particulate composites
|
Influence of mixture composition on the noise and frictional characteristics of flexible pavements
|
| |
|
Non-intrusive temperature measurement using microscale visualization techniques
|
Hierarchy in fracture as a stochastic process: Model, implementation and validation
|
| |
|
Fluid-structure interactions in the vibrations of rotating and stationary disks
|
A globally uniformly ultimately bounded adaptive robust control approach to a second-order nonlinear motion system with input saturation
|
| |
|
A combined experimental and computational approach to investigate the mechanism of spinal cord slow compression primary cellular injury
|
Protein adsorption on carbon nanotubes for biosensor applications
|
| |
|
Investigation of subcooled boiling in micro-channel heat sink for indirect refrigeration cooling applications
|
Severe plastic deformation and nanostructured materials by large strain extrusion machining
|
| |
|
A study of failure in bonded lap joints using fracture mechanics
|
Low temperature hybrid micro-channel/micro-jet impingement cooling
|
| |
|
Ultrafast dynamics of coherent phonon vibration in thermoelectric materials
|
Nonlinear normal modes and nonlinear model reduction for discrete and multi-component continuous systems
|
| |
|
Regulation and tracking control of nonminimum phase systems
|
Electrical actuation of liquid droplets on smooth and artificially microstructured surfaces
|
| |
|
Refrigerant flow boiling in microchannel evaporators
|
Experimental study of migration of shape-specific particles and its applications in fluidic self-assembly
|
| |
|
Elevated temperature fretting fatigue of nickel based alloys
|
Thermal and fluidic characterizations of piezoelectrically driven cantilevers
|
| |
|
Miniature-scale diaphragm compressor for electronics cooling
|
Microresonator designs based on nonlinear 1:2 internal resonance between flexural-flexural and torsional-flexural structural modes
|
| |
|
Phonon transport in confined structures and at interfaces
|
Combined heat and moisture transport modeling for residential buildings
|
| |
|
The modeling of sound absorption by flexible micro-perforated panels
|
Fluid-structure interactions of flexible structures in different fluid flow regimes
|
| |
|
Photoacoustic characterization and optimization of carbon nanotube array thermal interfaces
|
Application of electronic-resonance-enhanced coherent anti-Stokes Raman scattering to nitric oxide measurements in flames
|
| |
|
Computational acoustics of confined turbulent flows: Swirl combustor and venturi cavitation
|
Ion generation and ionic wind heat transfer at millimeter and micrometer scales
|
| |
|
Traveling-wave electrohydrodynamic micropumping induced in a temperature gradient
|
Material damage modeling and detection in a thin metallic sheet and sandwich panel using passive acoustic transmission
|
| |
|
Experimental investigation of airborne contaminant transport by a human wake moving in a ventilated aircraft cabin
|
Statistical numerical modeling of subsurface initiated spalling in bearing contacts
|
| |
|
Numerical simulations of wrinkling and wrinkling-induced delaminations
|
Hierarchical field compositions for discontinuous enrichment and system-level synthesis
|
| |
|
Development of efficient molecular simulation techniques for engineering applications
|
Explanations-based support for early design informed by a design study
|
| |
|
Interfacial area transport for reduced-gravity two-phase flows
|
Numerical simulations of flame dynamics in the near-field of high-Reynolds number jets
|
| |
|
Axisymmetric free-surface flows of non-Newtonian fluids with surfactants: A direct numerical simulation study
|
Extrinsic signatures embedding and detection in electrophotographic halftoned images through exposure modulation
|
| |
|
Measurement and analysis of heat transfer in a multi-element hydrogen/oxygen rocket combustor
|
Towards design representations for product space exploration in early design
|
| |
|
Modeling and control of a two component development process for xerography
|
Carbon nanotube mechanics in scanning probe microscopy
|
| |
|
Data-based process monitoring, fault detection and diagnostics
|
Dynamic Atomic Force Microscopy in liquids and applications to biological samples
|
| |
|
Nonlinear dynamics in nanomechanical systems
|
Acoustical estimation of macroscopic properties of poroelastic materials
|
| |
|
Modeling inter- and intra-tablet coating variability of pan coated tablets
|
Pressure-wave amplification of flame area in wave rotor channels
|
| |
|
Unsteady boundary layer and numerical modeling of transient heat transfer with application in wave rotors
|
Solution-limited time stepping method and numerical simulation of single-element rocket engine combustor
|
| |
|
Repetitive motion error compensation through iterative learning based calibration with application to flatbed document scanner
|
Breakdown voltage determination of gaseous and near cryogenic fluids with application to rocket engine ignition
|
| |
|
Nonlinear dynamics in the Beer Distribution Game -- A high-throughput computing analysis
|
Investigations of mechanical stresses within human vocal folds during phonation
|
| |
|
Experimental and theoretical assessment of flow asymmetries in normal and pathological speech
|
Dynamic crack initiation toughness: Experiments and peridynamic modeling
|
| |
|
Transmission of airborne contaminants in airliner cabins
|
Spray modeling and measurements for pharmaceutical tablet coating applications
|
| |
|
Effect of porosity and mullite on the thermal fracture of plasma-sprayed ceramic thermal barrier coatings
|
Model based optimization of axial piston machines focusing on noise and efficiency
|
| |
|
Arbitrarily explicit/implicit computational procedures for modeling phase evolution
|
Pneumatically-driven elastomeric devices for a programmable lab on a chip and applications
|
| |
|
Parallel optical nanolithography using nanoscale bowtie apertures
|
Computational analysis of micromachining Ti6Al4V titanium alloy
|
| |
|
Modeling of combustion in stratified hydrogen-air mixtures
|
Advanced simulations of air distributions in buildings
|
| |
|
Microscale transport in evaporating thin liquid films
|
Liquid droplet actuation and control on smooth and superhydrophobic surfaces using electric fields
|
| |
|
Multiphysics models of fluid and solute transport in the microvasculature of normal and malignant breast tissues with application to the detection and treatment of breast cancer
|
Two-phase flow and heat transfer in microchannels
|
| |
|
Coherent anti-Stokes Raman scattering for quantitative temperature and concentration measurements in a high-pressure gas turbine combustor rig
|
Shape mining in three dimensional models databases
|
| |
|
Phonon transport models for heat conduction in sub-micron geometries with application to microelectronics
|
An adaptive robust approach to actuator fault-tolerant control in presence of uncertainties and input constraints
|
| |
|
Lab-on-a-chip based biosensors for fundamental space biology research
|
Soy-based biodiesel blend estimation and accommodation in a modern diesel engine
|
| |
|
Dynamic manipulation by light and electric fields: Colloidal particles to droplets
|
Numerical investigations of subgrid-scale mixing models for large eddy simulation of turbulent reacting flows via the filtered mass density function approach
|
| |
|
Power management for multi-actuator mobile machines with displacement controlled hydraulic actuators
|
Multi-scale modeling and laser-assisted machining of metal matrix composites
|
| |
|
A compartmental approach to studying particle motion in mixer/coaters using discrete element modeling
|
Respiratory exhalation/inhalation models and prediction of airborne infection risk in an aircraft cabin
|
| |
|
A new voronoi finite element fatigue damage model
|
Examining the extent of environmental compliance requirements on mechatronic products and their implementation through product lifecycle management
|
| |
|
Ridge aperture optical antennas
|
Investigation of hydraulic transmission noise sources
|
| |
|
Attrition of pharmaceutical tablets
|
A power management strategy for hybrid output coupled power-split transmission to minimize fuel consumption
|
| |
|
Aircraft noise characteristics and metrics
|
Dynamic failure of borosilicate glass under various loading conditions
|
| |
|
Study of two-phase flows in reduced gravity
|
Microstructural effects on high cycle fatigue
|
| |
|
Multi-scale simulation of phonon transport across heterogeneous interfaces
|
Theoretical and experimental analysis of liquid flooded compression in scroll compressors
|
| |
|
Combustion characterization and modeling of novel energetic materials: Si/PTFE/Viton and Al/PTFE/Viton
|
Surface effects on start-up friction and their application to compact gerotor motor design
|
| |
|
Frequency and polarization resolved phonon transport in carbon and silicon nanostructures
|
Design and optimzation of fractional controller in manufacturing system with application of multilink robot and time delay chatter
|
| |
|
Design and analysis of heat exchangers for high pressure metal hydride hydrogen storage
|
Optimal parameter estimation for long-term prediction in the presence of model mismatch applied to a two-link flexible joint robot
|
| |
|
Formation of granule nuclei under static and dynamic powder bed conditions
|
Nonlinear analysis of thermoacoustic instabilities
|
| |
|
Crack propagation through adhesive interface in glass driven by dynamic loading
|
Investigation of dislocation behavior in micron and sub-micron thin films
|
| |
|
Investigation of actuated droplet motion on smooth and superhydrophobic surfaces
|
Design optimization of the suction manifold of a reciprocating compressor using uncertainty and sensitivity analysis
|
| |
|
ADDF observer-based adpative robust control of manufacturing processes
|
Unsteady computational analysis of shrouded plug nozzle flows and reacting impinging jets
|
| |
|
Design and modeling of a novel continuously variable transmission
|
Modeling and evaluation of advanced compression techniques for vapor compression equipment
|
| |
|
Dynamic model updating with applications in structural and damping systems: From linear to nonlinear, from off-line to real-time
|
A combined unit cell and mixture theory model to investigate cell microenvironment in three-dimensional fibrillar extracellular matrix during dynamic loading
|
| |
|
A meshless finite difference method for fluid flow and heat transfer
|
Efficient subdiffraction focusing of light using zone plate and bowtie aperture
|
| |
|
Transient and translating gas jet modeling for pressure gain combustion applications
|
Efficient and cost-effective thin film solar cells processed by direct pulsed laser crystallization and direct pulsed laser recrystallization techniques at room temperature
|
| |
|
Injection dynamics of gelled propellants
|
Investigation of compaction, Young's modulus and tensile strength of binary powder mixtures using the multi-particle finite element method (MPFEM)
|
| |
|
Air distribution effectiveness and thermal stratification with stratified air distribution systems
|
Characterization and measurement of hybrid gas journal bearings
|
| |
|
The propagation of sound from a monopole and directional source near a layered ground
|
Nonlinear dynamics of microcantilevers in liquid environment dynamic atomic force microscopy
|
| |
|
Two-phase heat and mass transfer in capillary porous media
|
Numerical studies of turbulence effects on developing flames in lean methane/air homogeneous mixtures
|
| |
|
Modeling a continuous granular mixer using periodic discrete element method sub-models
|
Experimental and analytical investigation of rotor bearing systems
|
| |
|
Development of injection-seeded optical parametric laser systems with pulsed dye amplifiers for high-spectral-resolution combustion diagnostics
|
A maximum entropy fracture model for low and high strain-rate fracture in SnAgCu alloys
|
| |
|
Generation mechanisms of tire-pavement noise
|
High-order L2 stable multi-domain finite difference method for compressible flows
|
| |
|
Combustion and evaporation characteristics of fuel droplets containing suspended energetic nanoparticles
|
Design of digital pump/motors and experimental validation of operating strategies
|
| |
|
Path planning of robotic hopping and swinging along an ordered sequence of points
|
Biomechanical influences on the vibration of human vocal fold tissue
|
| |
|
Universal predictive tools for two-phase pressure drop and heat transfer in boiling and condensing mini/micro-channel flows
|
Non-linear dynamics, fluid-structure interactions, and vibrations of microcantilevers in air and liquids
|
| |
|
An experimental and numerical investigation of the effect of coatings and the third body on fretting wear
|
Modeling and analysis of active valve control of a digital pump-motor
|
| |
|
Modeling and control of a fuel cell-battery hybrid vehicle
|
Thermal transport in layered materials for thermoelectrics and thermal management
|
| |
|
Design and analysis of cooperating mobile robots using non-grasping contact for object transportation
|
Modeling vertical U-tube ground heat exchangers for ground-coupled heat pump applications
|
| |
|
Fluid-structure interactions and vibration based condition monitoring of microsystems
|
An elastic-plastic finite element model for rolling contact fatigue
|
| |
|
Three-dimensional finite element modeling of rolling contact fatigue
|
Closed loop control for biodiesel blends in mixing-controlled combustion
|
| |
|
Computational modeling and experimental characterization of bacterial microcolonies for rapid detection using light scattering
|
Nanoscale material design for photovoltaic applications
|
| |
|
A miniature-scale linear compressor for electronics cooling
|
Conjugate heat transfer investigation of a fixed rib roughened cooling passage
|
| |
|
Microstructural prediction in metal cutting and improvement of machinability and surface integrity via laser-assisted machining
|
Integrated energy, economic, and environmental assessment for the optimal solar absorption cooling and heating system
|
| |
|
Modeling self-excited combustion instabilities using a combination of two- and three-dimensional simulations
|
Development of a model of startle resulting from exposure to sonic booms
|
| |
|
Evaporative transport in thin liquid films and electrically actuated droplets
|
An investigation of the fluid-structure interaction of piston/cylinder interface
|
| |
|
Robust tuners for high-Q RF tunable resonators and preselect filters
|
The influence of particle shape on structure, mechanics, and transport in granular materials
|
| |
|
Turbocharger map reduction and estimation of effective compression ratio in a modern diesel engine utilizing flexible intake valve actuation
|
Toward optimal multi-actuator displacement controlled mobile hydraulic systems
|
| |
|
Microstructural effects on constitutive and fatigue fracture behavior of SnAgCu solder
|
Thrust surfaces lubrication and friction reduction through surface modification
|
| |
|
Characterization of fluid-thermal transport and boiling in micro/nano-engineered porous structures
|
An investigation of rotor tip leakage flows in the rear-block of a multistage compressor
|
| |
|
Nonlinear dynamics of human posture on rigid and compliant surfaces
|
Fuel-flexible combustion control of modern compression-ignition and spark-ignition engines
|
| |
|
Physically-based modeling, estimation and control of the gas exchange and combustion processes for diesel engines utilizing variable intake valve actuation
|
Mesoscale modeling of strain induced solid state amorphization in crystalline materials
|
| |
|
Self-calibration for microelectromechanical systems (MEMS) with comb drives: Measurement of flexure width, gap, displacement, force, and stiffness
|
Study of uncertainty in the application of the micromechanical enhancement method to predict failure initiation of fiber composites
|
| |
|
Experimental study of twin opposing microvortex flows in an opto-electrokinetic microfluidic platform using micronresolution particle image velocimetry technique
|
Quantitative experimental and model-based imaging of infrared radiation intensity from turbulent reacting flows
|
| |
|
Experimental study of a turbulent stratified jet
|
